CHXRM - CS 5338
- MSDS: CHXRM
- Manufacturer: CLIFTON ADHESIVE INC
- Product Name: CS 5338
- National Stock Number: 8030-00-272-8530
Product Identification
Product ID:CS 5338
MSDS Date:01/19/1995
FSC:8030
NIIN:00-272-8530
Status Code:A
MSDS Number: CHXRM
Responsible Party
WAYNE, NJ 07474-0282
US
Emergency Phone: 201-694-0845
Info Phone: 201-694-0845
Cage: 79833
Contractor
Telephone: 201-437-6500
Cage: 2G164
Ingredients
PETROLATUM
CAS: 8009-03-8
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
First Aid
First Aid:SKIN: WASH W/SOAP AND WATER; GET MED AID. EYES: FLUSH WITH
MUCH WATER; GET MED AID. INGEST: TREAT SYMPTOMATICALY; GET MED AID.
Fire Fighting
Extinguishing Media:FOR DRY FILM: CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCUBA; DRY FILM WILL BURN;
COOL EXPOSED SURFACES WITH WATER SPRAY
Accidental Release
Spill Release Procedures:ABSORB IN SAND, EARTH, VERMICULITE, OIL-DRI,
OR SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL CONTAINER AND
COVER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT AND HOT SURFACES;
DO NOT STORE BELOW 40F OR ABOVE 90F
Exposure Controls
Ventilation:AS SPECIFIED - LOCAL EXHAUST; MECHANICAL EXHAUST (EXPLOSION
PROOF EQUIPMENT)
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:KEEP AREA CLEAN; CLEAN UP SPILLS IMMEDIATELY;
PRACTICE GOOD PERSONAL HYGEINE
Supplemental Safety and Health
EXPOSURE LIMITS ARE FOR AIR LEVELS ONLY. WHEN SKIN CONTACT OCCURS,
OVEREXPOSURE MAY RESULT THOUGH AIR LEVELS ARE LESS THAN LIMITS
LISTED UNDER INGREDIENTS.
Chemical Properties
Spec Gravity:920
Appearance and Odor:SOLID AT ROOM TEMP; MILD BLAND ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:KEEP FROM OXIDIZING AGENTS
Hazardous Decomposition Products:OXIDES OF CARBON
Disposal
Waste Disposal Methods:PER FED, STATE, AND LOCAL CHEMICAL AND SOLVENT
REGS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.